The control engineering is a part of the automation.
This concerned with the automated manipulation of a dynamic
system to get a desired situation.
On the contrary to a control influences the actual value of a settlement
By programmed control the frequency parameter are ascertained due to nominal size. Additional actual values are controlled by switchpoints.
Setpoints and actual values are saved in the control system so that long-run analyses can be effected.
Control circuits are adopted in any industries and any constructions. As soon as due to a physical value something has to be actuated, a control exists. The big advantage of the programmable memory control is here above all the universal applicability and adjustability from a module. Equal if there has to be something like the wind or dead slow arranged, there can be the same brick with the same window in the control station used. Merely the settings disagree. In addition the user gets the opportunity to accomplish changes on the settings online, to analyse the immediate consequences and to adjust the parameters thereupon. For this purpose there aren't needed difficult mathematic calculations, changes on the electrical engineering or complex measurements.
Ask now - We are looking forward to advise you and to make you an offer!
-> Ask now
<- Back to: Waste- and Wastewater Industry
<- Back to: Measurement engineering | Forward to: Weighing technique ->